Building a Game Table IV

Progress moves ever onward! Today got the curved corners glued up to the veneers and then attached them to the table. Notice all the clamps? If you're gluing then you need clamps, because clamps are a woodworker's best friend.

Corner view.


Side view.

This is a mockup for how to mount the slides in the bottom half of the table. Thought an 1/8" would work to clear the top, but the gap was too large so went to them being spaced 1/16" clearance. Also need to make cutouts for when the slides extend.

After more glue and screws, the mounts are complete. The slides are going to be attached to the top halves of the table. Now the wood work for the bottom half is complete (mostly). On to the top!

Part V